Collings I 35 LC Laminate Construction Tobacco Sunburst ThroBak Pickups ID-7061
Collings I 35 LC Laminate Construction Tobacco Sunburst ThroBak Pickups
Since Collings moved into the electric arena in 2006, Bill has had an interest in the role that laminate woods play in the tone of classic semi-hollow electrics and jazz guitars, and it was only a matter of time before he delved into a new variation. After much research and experimentation, and a few dissected classic guitars later... they are ready to introduce this exciting new line of electric guitars.
The I-35 LC model is a laminate maple version of the standard I-35. This guitar includes appointments such as a tobacco sunburst finish, dot inlays, an unbound Indian rosewood fingerboard and ebony peghead, and ThroBak pickups with amber knobs and rings.
Compared to the solid wood semi-hollow models, the laminate construction sends more controlled information to the pickups, allowing Collings to use higher output electronics.
Collings is now offering their electric models with a new choice of humbuckers, produced by Throbak. The Legendary 50's Gibson humbucker was the first successful humbucking pickup and is commonly referred to among collectors as the Patent Applied For pickup or PAF. Using similar tooling and wiring the Throbak MXV series uses vintage accurate reproduction to create pickups that offer the same vintage tones we know and love with a modern twist.
A common misconception of the Patent Applied For pickups was that these pickups were wound by hand. In fact, one of the most important tonal ingredients for the legendary Gibson PAF pickups was the vintage winding machines. Only using a small number of machines to wind the coils, each machine added it's own tonal signature to the PAF Pickups. ThroBak takes all the tonal possibilities that the winding machines are capable of and combine them to produce the ThroBak.
The SLE-101 Plus Limited has the same winder configuration as the SLE-101 Limited but with ThroBak custom cast unoriented A5 magnets and extra winds for more power and bite. The unoriented A5 has the crunch of A2 plus the added power of A5. Vintage spec. plain enamel magnet wire, Michigan hard maple wood spacer, vintage correct two conductor wire and threaded baseplate complete the picture. This provides a wonderful singing top end, a vibrant midrange, and a taut, precise low end. We plugged this one into a Carr Artemus and were completely floored with the tones that poured out of this guitar!
We wouldn't describe the tone of the laminate guitars as being better or worse than the solid equivalent. Instead, they should be viewed as two different guitars with two different sets of tonal characteristics.
Specifications:Expected Arrival: 2013-1
Shipping Weight: 68
Top Wood: Laminate Maple
Back Wood: Laminate Maple
Nut Width: 1 11/16"
Scale: 24 7/8"
Neck Wood: Mahogany
Nut Material: Bone
Bridge: Tonepros AVR-II bridge and tailpiece
Tuners: Nickel Gotoh SG301 tuners w/ vintage-style buttons 1:18 ratio
Body Binding: Aged white top/back binding
Headstock Shape: Unbound "Haircut" headstock
Headstock Overlay: Ebony
Headstock Inlay: Collings Logo
Body Depth: 1 5/8"
Lower Bout Width: 15"
Total Length: 40"
Pickup Controls: CTS 500K pots and Xicon caps / Switchcraft toggle switch and output jack
Case: Deluxe Ameritage Case
Misc. 1: Semi-Hollow Construction with Maple Center Block
Misc. 2: Long mortise and tenon neck joint w/contoured heel
Misc. 3: Inset maple center block
Misc. 4: Fully adjustable truss rod
Misc. 5: Slim contour F-holes
Misc. 6: 1950's Style wiring scheme