Collings I35 LC Deluxe Laminate Construction Tobacco Sunburst ID-7437
Collings I35 LC Deluxe Laminate Construction Tobacco Sunburst
Bill Collings' and his shop in Austin, Texas has been building some of the finest acoustic guitars for decades and has recently turned his attention to electric guitars. The result has been nothing short of astonishing. He has reinvigorated the industry with his take on classic design. The Collings I-35 is their reinterpretation of the semi-hollow body, two-pickup guitar.
While the rest of the industry at large uses pressed plywood for their backs, and bent sides, Collings carves the back and sides from one single slab of Mahogany. This preserves the "look" of a semi-hollow bodied guitar while providing noticeable sonic differences to the player's ears. The top is carved from a mineral flamed piece of book matched maple. This not only looks more like the "original" late 50's and early 60's instruments, but more importantly, sounds like an older guitar.
Collings collaborates with Jason Lollar for all their pickup designs. While the particular pickups they use are specially wound to Collings specifications, they are very near in design to the Lollar standard Imperial Humbucking models. Lollar manages to capture the airy top end, tight lows, balanced midrange, and complex overtones of the best original PAF pickups.
In reviews, they are consistently given high marks for their balanced frequency response. Unbalanced coils keep the bottom end tight for the intense richness the pickups provide, as overtones build after each note is played. Alnico 5 magnets are de-gaussed to specific levels, unique to the neck and bridge positions.
The sound Collings has developed with these pickups can certainly be described as mature. The neck position pushes out a lovely warmth and depth – ideal for jazz chording or chunky blues. None of the pesky midrange honkiness that can be found with bridge humbuckers is present. The bridge pickup is certainly hotter and more aggressive, but maintains full-bodied presence without any harshness. One reviewer had this to say about the pickups, "As they're pushed, they react with a smooth compression without becoming excessively bright."
The mahogany neck is superior quality wood and topped off with a Rosewood Fretboard with vintage style "dot" inlays. The profile is a comfortable "C" shape with rounded edges, giving it a wonderful, broken in feel. Leaving no detail untouched, the bridge and tailpiece are Tone-pros locking style, and the Gotoh tuners have grained-ivoroid buttons. You owe it to yourself to come in and plug this guitar into any of our Carr amplifiers and finally stop searching for the "tone", it has arrived!
Check out some of our other Collings Guitars
Shipping Weight: 68
Top Wood: Figured Maple
Back Wood: Mahogany
Nut Width: 1 11/16"
Scale: 24 7/8"
Inlays: MOP Dots
Neck Wood: Mahogany
Fretboard: Rosewood 12" Fingerboard radius
Nut Material: Bone
Bridge: Tonepros AVR-II bridge and tailpiece
Tuners: Nickel Gotoh SG301 tuners w/ vintage-style buttons 1:18 ratio
Body Binding: Grained ivoroid
Fretboard Binding: Grained ivoroid
Headstock Binding: Grained ivoroid
Headstock Shape: Collings Haircut Peghead
Headstock Overlay: Ebony
Headstock Inlay: Collings Logo
Frets To Body: 19
Neck Profile: Medium-Fat "C" neck shape
Body Depth: 1 5/8"
Lower Bout Width: 15"
Body Length: 17 5/8"
Total Length: 40"
Pickup(s): Dual Lollar Imperial Humbucker Pickups
Pickup Controls: Custom ivoroid pickup rings and top hat knobs
Case: Deluxe Ameritage Case
Misc. 1: Semi-Hollow Construction with Maple Center Block
Misc. 2: CTS 500K pots and Xicon caps
Misc. 3: Switchcraft toggle switch and output jack
Misc. 4: 1950's style wiring scheme
Misc. 5: Fully adjustable truss rod
Misc. 6: Medium 18% nickel-silver fretwire
Misc. 7: Slim contour F-holes
Misc. 8: High gloss nitrocellulose lacquer finish
Misc. 9: Long mortise and tenon neck joint w/contoured heel