Maton ECJ85 Custom Jumbo Guitar with Sitka Spruce and Rock Maple Pre-Owned 2009 ID-11214
A guitar that will cover all of your bases the Maton ECJ85 was born from the blending of traditional materials with exquisite craftsmanship. This custom jumbo represents a total, no compromise approach. Flawless attention to detail guarantees your Maton will be an instrument of pride and pleasure for many years to come.
With a bit different combination of Sitka Spruce and Rock maple, this guitar performs and sounds absolutley wonderful. Clear high range tones with very supportive low and mid range tones with balance across the board.
The tone of the Rock Maple back and sides is heavy and bright with plenty of articulation and low end for a maple guitar. Pairing this with the Sitka Spruce top ensures this guitar will shine in any setting or jam!
the AP5 Using the ‘Sweepable Mid’ controls. Midrange is sweepable from 1 to 2khz and can be cut or boosted within this range. As a general rule for the system should start out ‘flat’ then be altered to achieve the tone desires.
For example, an open, natural sound can be achieved by setting the frequency control at 1.4khz and the boost/cut control at 5db. Alternatively, for a ‘thick’ lead sound boost your mids by 5db and set the frequency dial at 1.7kh
This instrument is in Good Condition with heavy surface scratches all over as well as some pick scratches on the pickguard and some belt wear on the back. There are also two dings on the headstock. We have attempted to capture this in the detailed photos posted below.
TKL Case is Included
Go ahead and check out some of our other Maton Guitars
Shipping Weight: 20
Top Wood: Sitka Spruce
Back Wood: Rock Maple
Nut Width: 1 3/4"
Bracing: Maton X Braced
Inlays: MOP Block
Rosette: Herringbone w/ Gold and Black Rings
Neck Wood: Rock Maple
Nut Material: Bone
Saddle Material: Bone
Saddle Spacing: 2 1/8"
Bridge Pins: White with Black Dots
Tuners: Maton Gold Tuners
Body Binding: Black
Headstock Shape: Solid
Headstock Overlay: Blackwood
Headstock Inlay: MOP Maton Logo
Frets To Body: 14
Neck Profile: C Shape
Case: TKL Case Included
Misc. 1: Gloss Finish
Maton Guitars Maton Custom Shop Grand Royale Jumbo - 16261
Maton Guitars Custom Shop Grand Royale Jumbo Andy Allen joined the team at Maton in 1994. After 22 years on the floor, he was chosen as their lead craftsman to...
Maton Custom Shop Jumbo Guitar Cutaway with Sitka Spruce and Fiddleback Blackwood ID-11065
Maton Custom Shop JumboAs the head of Maton’s Custom Shop, Andy Allen has the ability to build a guitar that will produce the sound that the customer has ordered and...
Maton Custom Shop Jumbo w/ "AAA" Sitka & Blackwood ID-12325
Maton Custom Shop The Maton Custom Shop experience provides you with the opportunity to have a say in the dynamics of the desired sound speaking face-to-face with the craftsman who...