Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135
Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135
Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135
Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135
Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135
Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135
Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135
Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135
Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135
Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135

Maton EBG808 Sitka Spruce and Blackwood with Sunburst Finish Pre-Owned 2011 ID-9135

Maton EBG808

We cannot overstate the power and the punch of the Maton EBG808 Series. Within the smaller shape lies a mighty bass response and a focused projection, ideally suited for the recording studio. Since 1978, the 808 series has stood the test of time and is now available in several different tone-wood configurations.

The EBG808 has a soundboard of "AA" grade solid sitka spruce, solid Blackwood back and sides, and a neck of select Queensland Maple. The bridge is Rosewood, as is the fingerboard. The EBG808 model is easily recognised by its Blackwood Veneer keyhole headstock and its satin finish. Additionally, this instrument is equipped with the AP5 Pickup.

Using the ‘Sweepable Mid’ controls. Midrange is sweepable from 1 to 2khz and can be cut or boosted within this range. As a general rule for the system should start out ‘flat’ then be altered to achieve the tone desires. For example, an open, natural sound can be achieved by setting the frequency control at 1.4khz and the boost/cut control at 5db. Alternatively, for a ‘thick’ lead sound boost your mids by 5db and set the frequency dial at 1.7kh​

This Maton EBG808 is in excellent condition with a few minor surface scratches on the pickgurard and top, as well as a crack at the end jack which has been repaired. We have attempted to capture these in the detailed photos posted below.

Go ahead and take a look at some of our other high quality Maton Guitars

Maton EBG

Specifications:

Shipping Weight: 68 lbs

Serial: 6982

Top Wood: Sitka Spruce

Back Wood: Australian Blackwood

Nut Width: 1 23/32"

Scale: 25.1/2"

Year: 2011

Bracing: Maton X Braced

Inlays: Pearl Dot

Rosette: Herringbone

Neck Wood: Select Queensland Maple

Fretboard: Rosewood

Nut Material: Bone

Saddle Material: Bone

Saddle Spacing: 2 1/8"

Bridge: Rosewood

Bridge Pins: White with Black Dot

Tuners: Gold Grover Rotomatic

Purfling: Herringbone

Body Binding: Cream

Pickguard: Tortoise w/ Gold M

Headstock Shape: Solid

Headstock Overlay: Blackwwod

Headstock Inlay: Maton Logo

Frets To Body: 14

Neck Profile: C Shape

Pickup(s): AP5

Case: Original Hiscox Hardshell Case Included

Misc. 1: Setup High E: 2/32"

Misc. 2: Setup Low E: 3/32"

Misc. 3: Satin Finish

×
Welcome Newcomer